德国工业新标准66399

Mastertitelformat bearbeiten,Mastertextformat bearbeiten,Zweite Ebene,Dritte Ebene,Vierte Ebene,Fnfte Ebene,#,D,IN 66399,德国工业标准,66399,New standard for shredding data media,碎纸机数据媒体新标准,Contents,要旨,New DIN 66399,新德国工业标准,66399,Content & Requirements,内容和要求,Overview of the current data media shredding standards,概览当前碎纸机数据媒体新标准,Differences between DIN 66399, DIN 32757 & DIN EN 15713,德国工业标准,66399,和,32757,及德国欧盟共同标准,15713,三者的区别,New DIN 66399,新德国工业标准,66399,Content & Requirements,内容和要求,New DIN 66399,新德国工业标准,66399,The most important changes for DIN 32757 at a glance:,德国工业标准,32753,最重大的转变之一撇,Seven material categories with different requirements:,7,种材料的不同要求,Information presented in original size (paper .),资料呈现的原始尺寸（纸张）,Information presented in reduced size (microfilm .),资料呈现的尺寸减少（微缩胶卷）,Information on optical Data media (CDs/DVDs .),光学数据媒体资料（,CD,和,DVD,）,Information on magnetic data media (LTO tapes .),磁性数据媒体资料（磁带）,Information on hard drives with magnetic data media (hard drives ),带磁性的硬盘驱动器上的媒体资料（硬盘驱动器）,Information on electronic data media (USB sticks, SSDs ),电子数据媒体资料（,USB,驱动，固态硬盘等）,Two additional security levels for all data media2,种对所有数据媒体增加的安全等级,Additional SL or P-4 between old SL 3 and 4 (160 mm for information presented in original size),在原来的保密等级,3,和,4,之间增加了等级或者,P-4,（信息呈现在,160 mm,的原始尺寸上）,Additional security level 7 (or former HS Level 6; 5 mm for information presented in the original size,),增加了保密等级,7,（或之前的,HS,等级,6,，信息呈现在,5,mm,的原始尺寸上,）,Influencing the SL by mixing and compressing only possible for information presented in original size and up to max. SL 4,混合和压缩影响保密等级只可能适合信息呈现在原始尺寸并且保密等级最大为,4,的情况下,The tolerance values of the required particle surfaces will relate to mass in future and not to the number of particles of the test material,实验材料表面所要求的粒子公差值在未来会和质量有关系，而不是与粒子数量相关了,New DIN 66399,新德国工业标准,66399,DIN 66399- 1,Basics and terminology,Definitions and terminology,Definition of protection requirement, protection classes and security levels,Classification of the protection classes and protection requirement,DIN 66399-2,Requirements for data media shredding machines,Classification of data media,Requirements of the machines,DIN 66399-3,Data media shredding processes,Requirements for the processes,New DIN 66399-1,新德国工业标准,66399-1,In addition to fulfilling the protection requirement, data media shredders also need to be efficient and suitable for the users requirements. To ensure this it is necessary to divide data into protection classes and security levels and to define these.,除了满足客户保密要求外，数据媒体碎纸机还应是有效的并适合于用户的要求。,为了确保这一点，有必要将数据分成保护等级和安全级别，并对这些加以定义,New DIN 66399-1,新德国工业标准,66399-1,Protection class 1,保密阶段,1,Normal protection requirement for internal data:,对内部数据常规的保密要求,The most common category of information and intended for large groups.,最普通的资料并供大型团体使用,Unauthorised publication or dissemination would have a limited negative impact on the company.,未经授权的出版或传播会对公司有一定的负面影响,Protection of personal data must be ensured. There would otherwise be a risk to the position and financial situation of the affected persons.,一定确保对个人数据的保密，否则会危及到相关人员的职位和财政状况,Protection class 2,保密阶段,2,Higher protection requirement for confidential data:,对机密数据更高的保密要求,Restriction to a small group of persons required.,仅限于小团体人员的使用,Unauthorised dissemination would have a considerable affect on the company and could infringe legal obligations or laws.,未经授权的出版或传播会对公司有相当大的影响并可能侵犯法定义务或规章制度,The protection of personal data must fulfil strict requirements. There would otherwise be a considerable risk to the social standing and financial situation of the affected persons.,对个人数据的保密一定要满足严格的要求，否则会危及到相关人员的社会地位和财政状况,Protection class 3,保密阶段,3,Very high protection requirements for particularly confidential and secret data:,对特定机密保密数据非常之高的保密要求,Must be restricted to a very small, named group of authorised persons.,一定限于非常之小并指定的授权人员使用,Unauthorised dissemination would have possibly terminal consequences for the company and could infringe trade confidentiality obligations, contracts or laws.,未经授权的传播可能对公司有决定性的最终影响并可能侵犯商业保密义务，合同或法律,It is essential that the confidentiality of personal data is maintained. Otherwise there is a risk to the health and safety or personal freedom of the affected persons.,必须保证个人信息得到保护，否则会危及到相关人员的健康，安全或人身自由,The protection classes can be determined and defined as follows:,保密等级可分为并定义成以下几种,New DIN 66399-1,新德国工业标准,66399-1,Security level,保密等级,Explanation,说明,1,Data media shredding,in such a way that it is possible to reproduce the information represented on it without any special tools an,d,without specialist knowledge, but not without considerable time expenditure.,有可能无需特殊工具，也无需特殊,知识但要花费很长的时间去再修复数据存储,Recommended, e.g. for data media storing general data that is to be rendered unreadable.,推荐如：碎纸机储存的数据为不可读的,2,Data media shredding,of a kind that the reproduction of the data stored is only possible with tools and considerable time.,只需使用工具并花费很长的时间可修复数据存储,Recommended, e.g. for data media storing internal data that are to be rendered unreadable.,推荐如：碎纸机内部储存的数据为不可读数据,3,Data media shredding,of a kind that the reproduction of the data stored is only possible with considerable effort (personnel, tools, time).,只有可能通过花费很多努力（人力，工具，时间）才有可能修复数据存储,Recommended, e.g. for data media with sensitive and confidential data.,推荐如：敏感和机密的数据媒体,4,Data media shredding,of a kind that the reproduction of the data stored is only possible by using equipment or special machinery that is not usually commercially available.,只有可能通过设备或特殊设备才有可能修复数据存储,Recommended, e.g. for data media with particularly sensitive and confidential data.,推荐如：特别敏感和机密的数据媒体,5,Data media shredding,of a kind that the reproduction of the data stored is improbable given the current state of technology.,以现在的科技水平无法修复数据存储,Recommended, e.g. for data media with data that must be kept confidential.,推荐如：一定要保守机密的数据媒体,6,Data media shredding,of a kind that the reproduction of the data stored is impossible given the current state of technology.,以现在的科技水平无法修复数据存储,Recommended, e.g. for data media storing confidential data subject to extremely high protection requirements.,推荐如：有极其高的保密要求的机密数据媒体,7,Data media shredding,of a kind that the reproduction of the data stored is impossible given the current state of technology and scientific research.,以现在的科技水平和科研无法修复数据存储,Recommended, e.g. for data media storing highly classified data for which the most stringent security measures must be maintained.,推荐如：有安保措施加以保护的最高机密数据媒体,New DIN 66399-1,新德国工业标准,66399-1,The assignment of the three protection classes to the security levels can be made on the basis of table 2 “Assignment of Security Levels and Protection Classes”. However, it should be performed individually in a risk analysis.,安全等级的,3,种保密阶段的分配是基于表格,2,中的“安全等级和保密阶段的分配”。然而，它应按照风险分析来单独执行,New DIN 66399-1,新德国工业标准,66399-1,Allocation,Security levels / protection classes,分配安全等级和保密阶段,S 1,S 2,S 3,S 4,S 5,S 6,S 7,Protection class 1,保护等级,1,x,a,x,a,x,Protection class 2,保护等级,2,x,x,x,Protection class 3,保护等级,3,x,x,x,a,This combination cannot be used for personal data.,这一组合不用于个人资料,When choosing the suitable security level, in addition to the actual protection requirement and therefore also the protection class, the storage density and/or the size of the information presentation on the data medium, as well as the type of the data medium itself must be taken into consideration.,在选择合适的安全等级时，除了实际的保护要求和保密等级外，储存密度和,/,或信息呈现在数据媒体上的尺寸，而且数据媒体它自身的类型也一定要加以考虑,If the colour or other properties of the material ease reconstruction of data, a higher security level should be selected if necessary.,如果材料的颜色或其他特性很容易重组数据，有必要的话，那就应该选择更高级别的安全等级,New DIN 66399-2,新德国工业标准,66399-2,Equipment and installations for data media destruction are classified according to degree of destruction, taking the type of data medium into account. Distinctions are made according to six data media categories and seven security levels.,设施设备对数据媒体的销毁根据销毁的等级来分类，并对数据媒体的类型加以考虑。分类是根据,6,种数据媒体的种类和,7,种安全等级来判断的,New DIN 66399-2,新德国工业标准,66399-2,P, information presentation in original size (paper, film, printed forms ),P-,资料呈现的原始尺寸（纸张，胶膜，印刷制品）,F, information presentation reduced in size (film/slides ),F-,资料料呈现的尺寸减少（胶卷,/,幻灯片,）,O, information on optical data media (CDs/DVDs ),O-,光学数据媒体资料（,CD/DVD,）,T, information on magnetic data media (disks, ID cards, magnetic tape cassettes .),T-,磁性数据媒体资料（磁盘，身份证，盒式磁带）,H, information on hard drives with magnetic data media (hard drives),H-,带磁性的硬盘驱动器上的媒体资料（硬盘驱动器）,E, information on electronic data media (memory sticks, chip cards, solid state drives, mobile communications devices ),E-,电子数据媒体信息（储存卡，芯片卡，固态驱动器，移动通信设备）,There are six data media categories, which, in addition to known documents, also include new data media:,这里有,6,种种类的数据媒体，除了已知的文件外，还包括新的数据媒体,New DIN 66399-2,新德国工业标准,66399-2,DIN 66399-2 defines the requirements for the condition, shape and size of the shredded data media depending on the respective security level and type of data medium.,德国工业标准,66399-2,的定义要求了碎纸机数据媒体的条件形状和尺寸取决于各自的安全等级和数据媒体的类型,New DIN 66399-2,新德国工业标准,66399-2,Information presented in original size,在原始尺寸上呈现的信息,For example: paper, film, printed forms,例如：纸张，胶膜，印刷制品,Protection class,保护阶段,Security level,安全等级,Condition, form and size after shredding,碎过的状态、形状和尺寸,Tolerance,公差,P-1,Particle surface area max. 2,000 mm or,strip width max. 12.0 mm strip length not restricted,颗粒表面最大面积为,2,000 mm,或者条状的宽度最大为,12.0mm,，条状的长度未作限制,10% of the material may exceed the required particle surface area, however only to a max. of 3,800mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,3800mm,1,P-2,Particle surface area max. 800 mm,or,strip width max. 6.0 mm,strip length not restricted,颗粒表面最大面积为,800 mm,或者条状的宽度最大为,6.0mm,，条状的长度未作限制,10% of the material may exceed the required particle surface area, however only to a max. of 2,000mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,2000mm,P-3,Particle surface area max. 320 mm,or,strip width max. 2 mm,strip length not restricted,颗粒表面最大面积为,320 mm,或者条状的宽度最大为,2.0mm,，条状的长度未作限制,10% of the material may exceed the required particle surface area, however only to a max. of 800mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,800 mm,2,P-4,Particle surface area max. 160 m,and for regular particles: max. strip width 6mm,颗粒表面最大面积为,160 mm ,常规颗粒条状的宽度最大为,6mm,10% of the material may exceed the required particle surface area, however only to a max. of 480mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,480 mm,P-5,Particle surface area max. 30 mm,and for regular particles: max. strip width 2 mm,颗粒表面最大面积为,30mm ,常规颗粒条状的宽度最大为,2mm,10% of the material may exceed the required particle surface area, however only to a max. of 90mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,90 mm,3,P-6,Particle surface area max. 10 mm,and for regular particles: max. strip width 1 mm,颗粒表面最大面积为,10mm ,常规颗粒条状的宽度最大为,1mm,10% of the material may exceed the required particle surface area, however only to a max. of 30mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,30 mm,P-7,Particle surface area max. 5 mm,and for regular particles: max. strip width 1 mm,or,disintegration,颗粒表面最大面积为,5mm ,常规颗粒条状的宽度最大为,1mm,或分解,with particle surface area max. 5 mm,or,ash shredded with particle surface area max. 5 mm,颗粒表面最大面积为,5mm,或碎过的灰状物状颗粒表面最大面积为,5mm,No tolerance,无公差,New DIN 66399-2,新德国工业标准,66399-2,Information presentation reduced in size,在减少尺寸上呈现的信息,For example: microfilm,例如：微缩胶卷,Protection class,保护阶段,Security level,安全等级,Condition, form and size after shredding,碎过的状态、形状和尺寸,Tolerance,公差,F-1,Particle surface area max. 160 mm,颗粒表面面积最大,160 mm,10% of the material may exceed the required particle surface area, however only to a max. of 480 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,480 mm.,1,F-2,Particle surface area max. 30 mm,颗粒表面最大面积,30 mm,10% of the material may exceed the required particle surface area, however only to a max. of 90 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,90mm.,F-3,Particle surface area max. 10 mm,颗粒表面最大面积,10 mm,10% of the material may exceed the required particle surface area, however only to a max. of 30 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,30 mm.,2,F-4,Particle surface area max. 2.5 mm,颗粒表面最大面积,2.5 mm,10% of the material may exceed the required particle surface area, however only to a max. of 7.5 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,7.5 mm.,F-5,Particle surface area max. 1.0 mm,颗粒表面最大面积,1.0 mm,10% of the material may exceed the required particle surface area, however only to a max. of 3.0 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,3 mm.,3,F-6,Particle surface area max. 0.5 mm,or,shredded ash, max. 0.5 mm,颗粒表面最大面积,0.5 mm,或碎出来的灰状物最大为,0.5 mm,10% of the material may exceed the required particle surface area, however only to a max. of 1.5 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,1.5 mm.,F-7,Particle surface area max. 0.2 mmor,shredded ash, max. 0.2 mmor disintegration,颗粒表面最大面积,0.2 mm,或碎出来的灰状物最大为,0.2 mm,或分解,No tolerance,无公差,New DIN 66399-2,新德国工业标准,66399-2,Information on optical data media,光学数据媒体资料,e.g. CD/DVD,例如：,CD,或,DVD,Protection class,保护阶段,Security level,安全等级,Condition, form and size after shredding,碎过的状态、形状和尺寸,Tolerance,公差,O-1,Particle surface area max. 2,000 mm,颗粒表面面积, 2000 mm,10% of the material may exceed the required particle surface area, however only to a max. of 3,800 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,380 mm.,1,O-2,Particle surface area max. 800 mm,颗粒表面面积, 800 mm,10% of the material may exceed the required particle surface area, however only to a max. of 2,000 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,2000 mm.,O-3,Particle surface area max. 160 mm,颗粒表面面积, 160mm,10% of the material may exceed the required particle surface area, however only to a max. of 480mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,480 mm.,2,O-4,Particle surface area max. 30 mm,颗粒表面面积, 30 mm,10% of the material may exceed the required particle surface area, however only to a max. of 90 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,90 mm.,O-5,Particle surface area max. 10 mm,颗粒表面面积, 10 mm,10% of the material may exceed the required particle surface area, however only to a max. of 30 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,30 mm.,3,O-6,Particle surface area max. 5 mm,or,shredded ash, max. 5 mmor,melted product,颗粒表面最大面积,5 mm,或碎出来的灰状物质最大面积为,5 mm,或溶解材质,10% of the material may exceed the required particle surface area, however only to a max. of 15 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,15mm,O-7,Particle surface area max. 0.2 mm,or,shredded ash, max. 0.2 mm,or,melted product,颗粒表面最大面积,0.2 mm,或碎出来的灰状物质最大为,0.2mm,或溶解材质,10% of the material may exceed the required particle surface area, however only to a max. of 0.6 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,0.6 mm,New DIN 66399-2,新德国工业标准,66399-2,Information on magnetic data media,磁性数据媒体资料,e.g. Disks, ID cards, magnetic tape cassettes,例如：磁盘，身份证，盒式磁带,Protection class,保护阶段,Security level,安全等级,Condition, form and size after shredding,碎过的状态、形状和尺寸,Tolerance,公差,T-1,Medium,mechanically,inoperable,数据媒体不能使用,1,T-2,Medium, split several times,and,particle,surface area 2,000 mm,10% of the material may exceed the required particle surface area, however only to a max. of 3,800 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,3800 mm.,T-3,Particle surface area 320 mm,颗粒表面面积, 320 mm,10% of the material may exceed the required particle surface area, however only to a max. of 800 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,800 mm.,2,T-4,Particle surface area 160 mm,颗粒表面面积, 160 mm,10% of the material may exceed the required particle surface area, however only to a max. of 480 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,480 mm.,T-5,Particle surface area 30 mm,颗粒表面面积, 30 mm,10% of the material may exceed the required particle surface area, however only to a max. of 90 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,90 mm.,3,T-6,Particle surface area 10 mm,颗粒表面面积, 10 mm,10% of the material may exceed the required particle surface area, however only to a max. of 30 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,30 mm.,T-7,Particle surface area 2.5 mm,or,shredded ash, max. 2.5 mm or,melted product,颗粒表面面积, 2.5 mm,或碎出来的灰状物质最大为,2.5mm,或溶解材质,10% of the material may exceed the required particle surface area, however only to a max. of 7.5 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,7.5 mm.,New DIN 66399-2,新德国工业标准,66399-2,Information on hard drives with magnetic data media,带磁性的硬盘驱动器上的媒体资料,Protection class,保护阶段,Security level,安全等级,Condition, form and size after shredding,碎过的状态、形状和尺寸,Tolerance,公差,H-1,Hard drive mechanically/electronically inoperable,机械,/,电子硬盘驱动器无法使用,1,H-2,Data medium damaged,数据媒体损坏,H-3,Data medium deformed,数据媒体变形,2,H-4,Data medium split several times and deformed,And,particle surface area max. 2,000 mm,媒体数据断裂并变形，颗粒表面最大面积,2000 mm,10% of the material may exceed the required particle surface area, however only to a max. of 3,800 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,3800 mm.,H-5,Data medium split several times and deformed,And,particle surface area max. 320 mm,媒体数据断裂并变形，颗粒表面最大面积,320 mm,10% of the material may exceed the required particle surface area, however only to a max. of 800 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,800 mm.,3,H-6,Data medium split several times and deformed,And,particle surface area max. 10 mm,媒体数据断裂并变形，颗粒表面最大面积,10 mm,10% of the material may exceed the required particle surface area, however only to a max. of 30 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,30 mm.,H-7,Data medium split several times and deformed,And,particle surface area max. 5 mmOr,heating beyond Curie temperature,媒体数据断裂并变形，颗粒表面最大面积,5mm,或加热超出居里温度,10% of the material may exceed the required particle surface area, however only to a max. of 15 mm.,只有,10%,的材料可能超出要求范围，但最大的表面面积为,15 mm.,New DIN 66399-2,新德国工业标准,66399-2,Information on electronic data media (solid state drives):,电子数据媒体资料（,USB,驱动，固态硬盘等）,e.g. Memory sticks, chip cards, solid state drives (SSDs), mobile communication devices,例如：,储存卡，芯片卡，固态驱动器，移动通信设备,Protection class,Security level,Condition, form and size after shredding,Tolerance,E-1,Medium mechanically/electronically inoperable,数据媒体不能用,1,E-2,Medium split,数据媒体破裂,E-3,Medium split,and,particle surface area max. 160,mm,数据媒体破裂且颗粒表面最大面积为,160 mm,10% of the material may exceed the required particle surface area, however only to a max. of 480 mm.,10%,的材料可能超出要求范围，但最大的表面面积为,480 mm,2,E-4,Data medium (chip) split,and,particle surface area max. 30 mm,数据媒体（芯片）破裂且颗粒表面最大面积为,30 mm,10% of the material may exceed the required particle surface area, however only to a max. of 90 mm.,10%,的材料可能超出要求范围，但最大的表面面积为,390 mm,E-5,Data medium (chip) destroyed and split several times,and,particle surface area max. 10 mm,数据媒体（芯片）毁坏破裂且颗粒表面最大面积,10mm,10% of the material may exceed the required particle surface area, however only to a max. of 30 mm.,10%,的材料可能超出要求范围，但最大的表面面积为,30mm,3,E-6,Data medium (chip) destroyed and split several,Times And,particle surface area max. 1 mm,or,shredded ash, max. 1 mm,数据媒体（芯片）毁坏破裂且颗粒表面最大面积为,1mm,或碎过的灰状物最大为,1 mm,10% of the material may exceed the required particle surface area, however only to a max. of 3 mm.,10%,的材料可能超出要求范围，但最大的表面面积为,3 mm,E-7,Data medium (chip) destroyed several times,and,particle surface area max. 0.5 mm,or,shredded ash, max. 0.5 mm,数据媒体（芯片）毁坏破裂且颗粒表面最大面积为,0.5mm,或碎过的灰状物最大为,0.5mm,10% of the material may exceed the required particle surface area, however only to a max. of 1.5 mm.,10%,的材料可能超出要求范围，但最大的表面面积为,1.5 mm,New DIN 66399-3,新德国工业标准,66399-3,DIN 66399-3 is aimed at persons responsible for data as well as all those involved in the shredding process. It establishes the requirements for the respective shredding process and the individual process steps.,德国工业标准,66399-3,旨在对数据负责人及那些在碎纸过程种涉及到的人。这一标准确立了单独的碎纸程序和单独的工序要求,New DIN 66399-3,新德国工业标准,66399-3,The standard defines three different processes for data media shredding. However direct shredding is to be preferred to the other processes.,这个标准对,3,种不同的数据媒体碎纸流程加以定义。但直接粉碎还是优于其他程序,New DIN 66399-3,新德国工业标准,66399-3,Each of the three processes require the definition and documentation of the organisation, personnel and individual processes step.,这三个程序每一个都要求对组织，人员和每一个工序加以定义和文件记载,The requirements that must be fulfilled and