资源描述
单击此处编辑母版标题样式,单击此处编辑母版文本样式,第二级,第三级,第四级,第五级,*,*,1,样图,With control functions,fieldbus interface,Non-Intrusive,logging of operating data etc.,Part-turn actuators,SG 05.1-,SG 12.1,Multi-turn,actuators,SA 07.1-,SA 16.1,2,内部结构,?,XA,去,3,内部结构,接触器或可控硅,?,XA,去,4,内部结构,?,电源板,?,接触器或可控硅,?,XA,去,5,内部结构,?,显示屏和编程设备,?,电源板,?,接触器或可控硅,?,XA,去,6,内部结构,?,接口板,?,显示屏和编程设备,?,电源板,?,接触器或可控硅,?,XA,去,7,内部结构,?,逻辑板,?,接口板,?,显示屏和编程设备,?,电源板,?,接触器或可控硅,?,XA,去,8,内部结构,?,去,?,逻辑板,?,接口板,?,显示屏和编程设备,?,电源板,?,接触器或可控硅,?,XA,去,9,接口,?,去,?,去,?,就地操作面板带显示屏,10,11,1.,硬件,1.,换向装置,接触器或可控硅,.,电源板,.,继电器板,.,逻辑板,.,接口板,.,显示屏,.,总线连接板,.MWG,用于,SA,or,SG,执行器,12,换掉坏硅,1,5 kW,新款,（自年月周起,),Z039.700/01 THYRISTORMODUL-400VAC,Z041.045 LEISTUNGSTEIL-ETB-AM/AC-THYR-400-1,5kW-m.STECKER,Z041.046 LEISTUNGSTEIL-ETB-AM/AC-THYR-500-1,5kW-m.STECKER,旧款,K004.679 THYRISTORMODUL-500V-25A-ZS-24VDC,Z007.835 LEISTUNGSTEIL-AM-THYR-400V-1,5 KW,Z017.828 LEISTUNGSTEIL-AM-THYR-415V-1,5kW,Z027.576 LEISTUNGSTEIL-AM-THYR-500V-1,5kW,在里将接触器换成可控硅,1,5 kW,Z032.240 MODUL-AC-THYRISTOR-3x400V/1,5kW,or,Z038.267 UMRUESTSATZ-ETB-AM-THYR-400V-1,5kW,(fits for AM too),V001.634,1.1.,可控硅,Back to first slide,13,1,5 kW,K001.015A SCHUETZ-024/024V-50/60Hz-09A-2,2.4KW,7,5 kW,Z023.877A SCHUETZ-KPL-024/028V-50/60Hz-16A-4.7,5kW,K004.278 RC-GLIED-RC-3/022-400V.480V,K004.289 RC-GLIED-RC-3/022-500V.690V,1.1.,接触器,14,电源板,新板从年月起,Z039.666/xx,/01,PRINT-G/U-AC01.1-NT/PF-P380/400/415/500V-S24V,/02,PRINT-G/U-AC01.1-NT/PF-P440/460/480/575V-S24V,/03,PRINT-G/U-AC01.1-NT/PF-P525/600/660/690V-S24V,/04,PRINT-G-AC01.1-NT-P100/110/115/120V-S24V,/05,PRINT-G-AC01.1-NT-P208/220/230/240V-S24V,/06,PRINT-G/U-AC01.1-NT/PF-P208/220/230/240V-S24V,/07,PRINT-G/U-AC01.1-NT/PF-P440/460/480/575V-S115V,/08,PRINT-G/U-AC01.1-NT/PF-P380/400/415/500V-S115V,/09,PRINT-G-AC01.1-NT-P100/110/115/120V-S115V,/10,PRINT-G-AC01.1-NT-P208/220/230/240V-S115V,/11,PRINT-G/U-AC01.1-NT/PF-P208/220/230/240V-S115V,旧板于年底废止,Z031.651/xx,/01,PRINT-G/U-AC01.1-NT/PF-P380/400/415/500V-S24V,/02,PRINT-G/U-AC01.1-NT/PF-P400/460/500/575V-S24V,/03,PRINT-G/U-AC01.1-NT/PF-P120/208/230/240V-S24V,/04,PRINT-G-AC01.1-NT-P120/208/230/240V-S24V,/05,PRINT-G/U-AC01.1-NT/PF-P400/660/690V-S24V,/06,PRINT-G/U-AC01.1-NT/PF-P400/460/500/575V-S115V,/07,PRINT-G/U-AC01.1-NT/PF-P120/208/230/240V-S115V,/08,PRINT-G-AC01.1-NT-P120/208/230/240V-S115V,/09,PRINT-G/U-AC01.1-NT/PF-P415/440/480/525V-S24V,/10,PRINT-G/U-AC01.1-NT/PF-P415/440/480/525V-S115V,/11,PRINT-G-AC01.1-NT-P100/110/115/120V-S24V,/12,PRINT-G-AC01.1-NT-P208/220/230/240V-S24V,/13,PRINT-G/U-AC01.1-NT/PF-P208/220/230/240V-S24V,/14,PRINT-G-AC01.1-NT-P100/110/115/120V-S115V,/15,PRINT-G-AC01.1-NT-P208/220/230/240V-S115V,/16,PRINT-G/U-AC01.1-NT/PF-P208/220/230/240V-S115V,BG02,BG06,BG02,BG04,BG02,BG04,PRINT,board,NT,power supply,PF,Phase detection,S24V,24V secundary,S115V,115V secundary,15,3.2.,电源板,BG02,BG06,BG02,BG04,BG02,BG04,X2:,去继电器板,X10,Protected by fuse F4,X2.1=24/115 VAC contactor,TMS(EX)to X10,X2.2=24/115 VAC contactor,TMS(EX)to X10,Monitoring of motor protection SA/SAEX/SAFM,X2.3=24/115 VAC to heater XA 47,X2.4=24/115 VAC to heater XA 47,X2.5=voltage ext.from customer AC 24/115,X2.6=voltage ext.from customer AC 24/115,Jumper between,X4.2(F4)-,X2.5-,X2.3-,X2.1,X2.6-,X2.4-,X2.2,X5:to XC(24VDC galv.separated),Protected by a self resetting fuse,X5.1=+24VDC(most cases analog input),X5.2=+24VDC for customer,X5.3=0V for X5.1,X5.4=0V for X5.2,Jumper between,Rectifier-X5.1-X5.2-X8.1,Rectifier-X5.3-X5.4-X8.2,X8:,去接口板,X6,(24VDC galv.separated),X8.1=+24V DC to X6.1,X8.2=0V DC to X6.2,Jumper between,Rectifier-X5.1-X5.2-X8.1,Rectifier-X5.3-X5.4-X8.2,X1:,初级侧,X1.1=L3,X1.2=L2,X1.3=L1,X1.4=L1,X1.5=L1,X1.6=L1,X6:,去继电器板,(24VDC),Protected by fuse F3,Has a Jumper to X7.1 and X7.2,X6.1=+24VDC to X1.1,X6.2=0V to X1.2,X7:,备用,(24VDC),Protected by fuse F3,X7.1=+24V has a Jumper to X6.1,X7.2=0V has a Jumper to X6.2,X3:,去逻辑板,(,鉴相功能,),X3.1=+15VDC to X 7.1,X3.2 Phase 1=0V (CW)-,15V(CCW)to X 7.2,X3.3 Phase 2=15V (CW)-,0V (CCW)to X 7.3,X3.4=0V to X7.4,As X7.2 and X7.3,有相同电压时就需要更换板子,X9:F3(24VDC fuse,1.6,AT,),(old board has plugs for the fuse F3(1,6 AT)here),Protect Phase Sequence Detection,X6,X7,X9.1=AC24V not measureable,X9.2=AC24V not measureable,You can control the voltage on X6,X7 or check the fuse,When fuse is blown,the display and the LEDs,are dark.,X4:F4(24VAC/115VAC fuse,1,25AT/,24VAC,0,315 AT/115VAC,),(,old board has,plugs for the fuse F4 here),X4.1 trafo to F4,X4.2 F4 to,X2.5-,X2.3-,X2.1,此保险烧断时，屏幕显示过热保护故障,All arrows start by PIN No.1,新板,(Z039.666/xx),大图,旧板,(Z031.651/xx),小图,16,1.3.,继电器板,Z031.695/xx,/01,PRINT-G/P-AC01.1-024AC/SHTZAN/THYR,/02,PRINT-G/P-AC01.1-115AC/SHTZAN/THYR,/03,PRINT-G/P-AC01.1-Ex-024AC/SHTZAN-TMS01.2,/04,PRINT-G/P-AC01.1-024AC/SHTZAN/THYR-TMS01.2,/05,PRINT-G/P-AC01.1-115AC/SHTZAN/THYR-TMS01.2,/06,PRINT-G/P-AC01.1-024AC/SHTZAN/THYR-o.EXT,/07,PRINT-G/P-AC01.1-Ex-024DC/SHTZAN+THRM.OVERCURRENT-RELAIS,BG02,BG02,BG02,BG03,BG02,BG08,BG06,PRINT,board,Ex,for Ex,024AC,24V AC secondary,115AC,115V AC secondary,SHTZAN,for contactors,THYR,for thyristor,TMS01.2,for thomson-motors,o.Ext,without 24V input,connection,THRM.,OVER,CURRENT-,RELAIS,for thermal overcurrent,relais,17,Back to first slide,3.3.,继电器板,(Z031.695/xx),X1:,来自电源板,X6(24VDC),X1.1=+24VDC,X1.2=0V,X8:,去逻辑板,电机保护,),X8.1=+15VDC signal(without fault),X8.2=0V,Output signal X8.1 fromK3 is optically isolated,X2:from XC(24VDC),X2.1=+24VDC from customer,X2.2=0V from Customer,X10:,来自电源板,X2(24VAC or,115VAC),Plug X2 has more connection than these,X10.1(24VAC or 115VAC)to X2.1,X10.2(24VAC or 115VAC)to X2.2,X9:,电机保护,X9.1=to XA 19,X9.2=to XA 20,(resistance between X9.1 and X9.2 100 ohm,at 23,C)or thermal switch(0 ohm),X4.1=+24VDC signal for relay K2 open,X4.2=+24VDC signal for relay K1 close,X4.3=Not in use,X4.4=Not in use,X4.5=+24VDC signal for TMS(EX)reset,X4.6=0V,X6:,去逻辑板,X8(AUMA-Bus),X6.1=CAN L,X6.2=CAN H,X6.3=0V,X6.4=+24VDC,X6.5=+15VDC,X6.6=+5VDC,Jumper 1:1 between,X6 to X5,X5:,备用,(AUMA-Bus),X5.1=CAN L,X5.2=CAN H,X5.3=0V,X5.4=+24VDC,X5.5=+15VDC,X5.6=+5VDC,Jumper 1:1 between,X5 to X6,X3:,备用,(24VDC USV),X3.1=+24VDC,X3.2=0V,X7:,去接触器,(24VAC or 115VAC),X7.1 NO contact of board relay K1 to,the coil of contactor K1 close,X7.2 AC common to coil K1/K2,X7.3 NO contact of board relay K2 to,the coil of contactor K2 open,X11:,去可控硅,X11.1=0V,X11.2=+24VDC signal for relay K2 open,X11.3=+24VDC signal for relay K1 close,X11.4=0V,Jumper between,X11.2 to X4.1,X11.3 to X4.2,All arrows start by PIN No.1,X4.7=+24VDC signal,thermal test pass,X4.8=Not in use,Jumper between,X4.1 to X11.2,X4.2 to X11.3,K1,K2,K3,FILTER,Motor,Protection,X4:,来自逻辑板,X5,Jumper,in EX-positon,EX-position:,Contactors are switched off directly,by the thermal switch.In case of an,emergency the contactors will be,switched off though the parameters say to,ignore the thermal fault.,normal position:,Contactors are switched off by the logic,boards software according to the,parameters.,BG02,BG02,BG02,BG03,BG02,BG08,BG06,18,3.3.,继电器板,(Z031.695/03),短路电机热电阻,热保护跳闸后能否自动复位,K1,K2,K3,FILTER,Motor,Protection,BG02,BG02,BG02,BG03,BG02,BG08,BG06,19,1.4.,逻辑板,BG08,Z031.773/01,(,不再使用,),to be used only with Eprom Software Z031.922/03-xx,current software version:,Z031.922/03-11,Z039.670A,Kit with logic board,parametrised EEprom,and,software Eprom,works number required!,BG26,BG10,BG06,BG02,BG04,IDC/FL,Z031.773/02,Z031.773/03(for MWG use only),to be used only with Eprom Software Z031.922/05-xx,Z031.922/07-xx(for DeviceNet),Z031.922/08-xx(for Profibus,Modbus,Devicenet,Foundation Fieldbus,supported,languages english,german,italien,french,spanish,portugese),current software version:,Z031.922/08-01,version Z031.922/08-01,After a software update the aumatic can indicate the“INTERNAL WARNING”,in S2 and“NO FACTORY SETTINGS”in D3,because of more parameters are,used.Please go to menu D4201(service password is needed)and“SAVE,NEW FACTORY SETTINGS”to fix this.,Plug Z038.305 to deactivate any,message of the phase detection.,ATTENTION actuator may turn in,the wrong direction,because,wrong phase sequence will no,longer be corrected!,Back to first slide,20,3.4.,逻辑板,X4:,就地操作面板,to X3,X4.1,X4.18,Possible measurement on:,X4.17=+5VDC,X4.18=0V,X1:AUMA-Bus to,接口板,X1,Row,1,:,X1.1=CAN L,X1.2=CAN H,X1.3=0V,X1.4=+24VDC,X1.5=+15VDC,X1.6=+5VDC,X8:AUMA-Bus to,继电器板,X6,X1.1=CAN L,X1.2=CAN H,X1.3=0V,X1.4=+24VDC,X1.5=+15VDC,X1.6=+5VDC,X7:,来自电源板,X3,X7.1=+15VDC to X 3.1(voltage from logic X7),X7.2=0V (CW)|14,2V(CCW)|14,2V(Ph)to X 3.2,X7.3=14,2V(CW)|0V(CCW)|14,2V(Ph)to X 3.3,X7.4=0V to X3.4(GND is from logic X7),As X7.2 and X7.3 has equal voltage the power,supply has to be changed.,(Ph)Phase error,X5:,去继电器板,X5.1=+24VDC signal for relay K2 open,X5.2=+24VDC signal for relay K1 close,X5.3=Not in use,X5.4=Not in use,X5.5=+24VDC signal for TMS(EX)reset,X5.6=0V,XT:,实验用,X3:,电机热保护去继电器板,X8,X3.1=+15VDC(on board)to X8.1,X3.2=0V to X8.2,Thermal fault will be indicated,if X3.1 and X3.2,are disconnected.Connected the tension between,X3.1 and X3.2 is 0VDC(15VDC with thermal fault),X1:AUMA-Bus to,接口板,X1,Row,2,Not in use,1,2,Setting not visible:On display:,D0 PULL,UP INPUTS,/SA+SG with MWG(Logic,version Z031.922/,02,-.and higher).Wrong,setting=configuration fault,L,I,M,I,T,X2:,去,(MWG)/(standard unit)2 different cable assemblies,X2.1=CAN L to XA 2,X2.2=CAN H to XA 3,X2.3=0V to XA 6,X2.4=+24VDC to XA 7,X2.5=+15VDCto XA 10,X2.6=+5VDC to XA 11,X2.7=RWG signal,X2.8=WOEL to XA13,X2.9=WSR to XA10,X2.10=0V,X2.11=+24VDC to XA9,X2.12=AS torque signal,X2.13=DOEL to XA 6,X2.14=DSR to XA 2,X2.15=0V,X2.16=+24VDC to XA1,X2.17=+24VDC,X2.18=0V to XA24,X2.19=(+)RWG to XA23,X2.20=(-)RWG to XA22,X2.21=+5VDC to XA23,X2.22=0V to XA 22,X2.23=POTI to XA21,X2.24=+24VDC,X2.25=0V,M,W,G,T,O,R,Q,U,E,R,W,G,P,O,T,BRAKE AS,All arrows start by PIN No.1,V9 LED RED,illuminated CPU running,flashing watchdog alarm:Lost,connection to master,V10 LED SYSTEM OK,must flash(green),数据存储器,(settings,operational,data,configuration,factory.,Program memory(Software),2,1,26,25,to,p,bottom,Setting visible:On display:,D0 PULL down,INPUTS,/SA+SG with standard control,unit,X6:,备用,(2 dig.inputs/outputs),X6.1=+24VDC,X6.2=Input 1,X6.3=+24VDC,X6.4=Input 2,X6.5=+24VDC,X6.6=Output 1,X6.7=+24VDC,X6.8=Output 2,Jumper:X6.1-X6.3-X6.5-X6.7,emergency shut off,XC47 and XC48,1,2,BG26,BG10,BG06,BG02,BG04,BG08,IDC/FL,Back to first slide,21,1.5.,接口板,DeviceNet,Standard-,Interface,0/4-20mA,?,PROCESS,FIELD,BUS,Back to first slide,22,2.5.,接口板和连接板,DeviceNet,Standard-,Interface,0/4-20mA,?,PROCESS,FIELD,BUS,FibreOptic-coupler,Back to first slide,23,3.5.,连接板,DeviceNet,Standard-,Interface,0/4-20mA,?,PROCESS,FIELD,BUS,Back to first slide,24,1.5.I/O,接口板,6,5,4,3,2,1,X5:analogue outputs(0-20mA),X3:digital inputs(24VDC/115VAC),X4:digital outputs(relay contacts/250V/1A,Z031.408/xx,/01,PRINT-E/A-AC-024DC/115AC-6dE/6dA/2aE/2aA,/02,PRINT-E/A-AC-024DC/115AC-6dE/6dA/1aA,/03,PRINT-E/A-AC-024DC/115AC-6dE/6dA/2aE/2aA-24DC EXT,/04,PRINT-E/A-AC-024DC/115AC-6dE/6dA/1aA-24DC EXT,/05,PRINT-E/A-AC-024DC-4dE/6dA/2aA,1,2,4,3,top,bottom,18,12,1,BG12,BG06,BG18,BG02,BG06,/BG04,BG04,PRINT,Board,24VDC/,115AC,for 24VDC and 115VAC,dE,number of digital input,dA,number of digital output,aE,number of analogue input,aA,number of analog output,EXT,usable with the option,external 24V supply,Back to first slide,25,2.5.I/O,接口板,bus-,interface,boards,standard interface(X3,X4,X5,X7)to XC,XC to connection board,connection boards,Standard,0/4-20mA,Z031.408/xx,X3:Z031.504(24V)(Com.789784)or,Z031.950(115V)(Com.775492),X4:Z031.825(Com.789784),X5:Z031.823(Com.789784),X7:Z031.824(Com.789784),-,no connection board necessary,because of direct connection to XC,Back to first slide,26,3.5.I/O,接口板,X7:,模拟量输入,(0-20mA),X7.1=+24VDC,X7.2=analogue input 1(+)to XK12,X7.3=analogue input 1(-)to XK13,X7.4=analogue input 2(+)to XC 27,X7.5=analogue input 2(-)to XC 28,X7.6=+24VDC,X5:,模拟量输出,(0-20mA),X5.1=ANOUT 1(+)to XC 23,X5.2=ANOUT 1(-)to XC 24,X5.3=ANOUT 2(+)to XC 29,X5.4=ANOUT 2(-)to XC 30,X8:not used,Jumper to,X8.1 to X3.7=EMERGENCY,X8.2 to X3.8=0V,X8.3 to X3.10=BUS,X8.4 to X3.11=0V,X3:,数字输入,(24VDC/115VAC),X3.1 to XC 3=signal(Positioner)=0V(DIG),X3.2 to XC 4=signal close,X3.3 to XC 5=signal open,X3.4 to XC 6=signal stop,X3.5 to XC 7=0V(by XC 3,6/24VDC),X3.6 to XC 7=0V (by XC 3-6/115VAC)resistance,X3.7 to XC 8=signal(OK)=0V(EMERGENCY),X3.8 to XC 9=0V(by XC 8/24VDC,X3.9 to XC 9=0V (by XC 8/115VAC)resistance,Function of Emergency has to be set in the parameter,Standard:Parameter setting is off,X3.10 to XC 10=signal(Positioner)=0V(BUS),X3.11 to XC 11=0V(by XC 10/24VDC,X3.12 to XC 12=0V (by XK10/115VAC)resistance,Valid only in combination with a BUS board,X6,来自电源板,X8,Supply of,analogue outputs X5,X6.1=+24VDC to X8.1,X6.2=0V,X1:AUMA-Bus to,接口板,X1,Row,1,:,X1.1=CAN L,X1.2=CAN H,X1.3=0V,X1.4=+24VDC,X1.5=+15VDC,X1.6=+5VDC,X1:AUMA-Bus to,接口板,X1,Row,2,Not in use,1,2,Potentiometers,for calibration,of,analogue outputs(adjusted and fixed,with varnish)right for output 1 and left,for output 2.Clockwise rotation,increases the value at both ends.,1,2,4,3,top,bottom,1,18,12,1,X4.1 K1 to XC 14=NC(fault),X4.2 K1 to XC 15=NO(OK),X4.3 K1 to XC 16=COM,X4.4 K2 to XC 17=NC,X4.5 K2 to XC 18=NO(DOUT1),X4.6 K2 to XC 19=COM,X4.7 K3 to XC 20=NC,X4.8 K3 to XC 21=NO(DOUT2),X4.9 K3 to XC 22=COM,X4:,数字输出,(relay contacts/250V/1A,X4.10 K4 to XC 32=NC,X4.11 K4 to XC 33=NO(DOUT3),X4.12 K4 to XC 34=COM,X4.13 K5 to XC 35=NC,X4.14 K5 to XC 36=NO(DOUT4),X4.15 K5 to XC 37=COM,X4.16 K6 to XC 38=NC,X4.17 K6 to XC 39=NO(DOUT5),X4.18 K6 to XC 40=COM,Jumper,Standard:without Jumper,Optional:with Jumper,The jumpers connect all commons on,X4.Without Jumpers relays can be,used isolated,6,5,4,3,2,1,LED V9,(green),on,System OK,flashing,board defect,off,check boards power supply,LEDs,1.Mode,2.Close,3.Open,4.Stop,5.Emergency,6.Reserve,S1,板子地址,S2,备用,setting S1.off/S2.off,Two I/O board can not be used together.,1 2,ON,All arrows start by PIN No.1,BG12,BG06,BG18,BG02,BG06,/BG04,BG04,Back to first slide,27,PROFIBUS DP,Z031.231/01,Z031.231/03(without digital and analogue,inputs),Back to first slide,28,2.5.Profibus,bus-,interface,boards,bus interface(X2)to XC,XC to connection board,connection boards,Z031.231/01,Z031.231/03,without digital,inputs,Z033.203,-,Z031.796(Com.794722),Z030.562A/03 only one channel,?,PROCESS,FIELD,BUS,Back to first slide,29,2.5.Profibus,冗余,bus-,interface,boards,bus interface(X2)to XC,XC to connection board,connection boards,Z031.231/01,Z031.231/03,without digital,inputs,Z031.939 cable redundancy(Com.751720)or,Z033.203 hardware redundancy(Com.853063),-,Z031.796,Z030.562A/01 two channels,?,PROCESS,FIELD,BUS,cable redundancy,hardware redundancy,Z031.939(with gold pins),Z034.353(standard),Back to first slide,30,2.5.Profibus,星型拓扑,bus-,interface,boards,bus interface(X2)to XC,XC to connection board,connection boards,Z031.231/01,Z031.231/03,without digital,inputs,Z033.203(,Z032.262 for 24V),-,Z031.796,Z030.568A for 24V(Com.23000941),Z032.242/01 optical link ring,?,PROCESS,FIELD,BUS,Back to first slide,31,2.5.,光纤,-,星型,-,线形拓扑,bus-,interface,boards,bus interface(X2)to XC,XC to connection board,connection boards,Z031.231/01,Z031.231/03,without digital,inputs,Z033.203(,Z032.262 for 24V),-,Z028.769,Z028.768 for 24V(Com.209857),Z028.020/01 optical link star,line,?,PROCESS,FIELD,BUS,Back to first slide,32,PROFIBUS DP,(Z031.231/01 or/03),V1,=System OK(green),LED is illuminated=shows the correct supply of,voltage.LED is blinking=Micro controller is,defect LED is off=no supply with voltage,V2,=DATA EX(green),LED is illuminated=ready for DATA exchange,V3,=CAN STATE(red),LED is illuminated or blinking=communication fault to,the logic board.,LED is off=communication to logic board is OK,1 2,ON,V16,=DigIn 1,V19,=DigIn 2,V22,=DigIn 3,V25,=DigIn 4,LEDs are illuminated,when customer supplied,24 V on the digital,inputs,X2 to BUS connection board,X 2.1(K1PR)=XC 33 Redundancy 1,X 2.2(K1PR)=XC 34 Redundancy 1,X 2.3(K1PB)=XC 31,X 2.4(K1NA)=XC 32,X 2.5 GND/FI =XC 39,X 2.6 5VDC/FI=XC 40,X 2.7(K2PB)=XC 35,X 2.8(K2NA)=XC 36,X 2.9(K2PR)=XC 37 Redundancy 2,X 2.10(K2PR)=XC 38 Redundancy 2,X4 Digital/Analog Inputs,X4.3 to XC 12=ANIN 1(+),X4.4 to XC 13=ANIN 1(-),X4.5 to XC 27=ANIN 2(+),X4.6 to XC 28=ANIN 2(-),X4.8 to XC 7 =0V,X4.9 to XC 3 =DIGIN 1(24VDC),X4.10 to XC 4=DIGIN 2(24VDC),X4.11 to XC 5=DIGIN 3(24VDC),X4.12 to XC 6=DIGIN 4(24VDC),3,All arrows start by PIN No.1,S1,板子地址,S2,备用,standard,setting S1.off/S2.off,if two boards of the same type are used the setting of,the second board have to be changed to S1.on/S2.off,top,bottom,2,1,BG10,Identification characteristic,between MODBUS and,PROFIBUS board,1,top,bottom,2,BG12,V4,=STATE(green),LED is illuminated or off=board not ready,LED is blinking once=board is running,Back to first slide,33,1.5.Modbus,MODBUS,Z031.231/02,has to be used with logic software,eprom version:,Z031.922/08-01,X2 to BUS connection,board,X4 Digital/Analog Inputs,top,bottom,2,1,BG10,1,top,bottom,2,BG12,Back to first slide,34,2.5.Modbus,bus-,interface,boards,bus interface(X2)to XC,XC to connection board,connection boards,Z031.231/02,Z031.939,-,Z031.796(Com.849848),Z030.562A/03 only one channel,Back to first slide,35,2.5.Modbus,冗余,bus-,interface,boards,bus interface(X2)to XC,XC to connection board,connection boards,Z031.231/02,Z031.939 cable redundancy(Com.779150)or,Z033.203 hardware redundancy(Com.857097),-,Z031.796,Z030.562A/02 two channels,cable redundancy,hardware redundancy,Z031.939(with gold pins),Z034.353(standard),Back to first slide,36,2.5.Modbus LWL,bus-,interface,boards,bus interface(X2)to XC,XC to connection board,connection boards,Z031.231/02,Z033.203(,Z032.262 for 24V),-,Z031.796,Z030.568A for 24V(not built yet),Z032.242/01 optical link ring,Z033.203(,Z032.262 for 24V),-,Z028.769,Z028.768 for 24V(not built yet),Z028.020/01 optical link star,line,Back to first slide,37,3.5.Modbus,1 2,ON,V4,=STATE(green),LED is illuminated or off=board not ready,LED is blinking once=board is running,V3,=CAN STATE(red),LED is illuminated or blinking=communication fault to,the logic board.,LED is off=communication to logic board is OK,V2,=DATA EX(green),LED is illuminated=ready for DATA exchange,V1,=System OK(green),LED is illuminated=shows the correct supply of,voltage.LED is blinking=Micro controller is,defect LED is off=no supply with voltage,Identification characteristic,between MODBUS and,PROFIBUS board,X2 to BUS connection board,X4.3 to XC 12=ANIN 1(+),X4.4 to XC 13=ANIN 1(-),X4.5 to XC 27=ANIN 2(+),X4.6 to XC 28=ANIN 2(-),X4.8 to XC 7 =0V,X4.9 to XC 3 =DIGIN 1(24VDC),X4.10 to XC 4=DIGIN 2(24VDC),X4.11 to XC 5=DIGIN 3(24VDC),X4.12 to XC 6=DIGIN 4(24VDC),X 2.1(K1PR)=XC 33 Redundancy 1,X 2.2(K1PR)=XC 34 Redundancy 1,X 2.3(K1PB)=XC 31,X 2.4(K1NA)=XC 32,X 2.5 GND/FI =XC 39,X 2.6 5VDC/FI=XC 40,X 2.7(K2PB)=XC 35,X 2.8(K2NA)=XC 36,X 2.9(K2PR)=XC 37 Redundancy 2,X 2.10(K2PR)=XC 38 Redundancy 2,V16,=DigIn 1,V19,=DigIn 2,V22,=DigIn 3,V25,=DigIn 4,LEDs are illuminated,when customer supplied,24 V on the digital,inputs,All arrows start by PIN No.1,X4 Digital/Analog Inputs,S1 Board address,S2 reserve,standard,setting S1.off/S2.off,if two boards of the same type are used the setting of,the second board have to be changed to S1.on/S2.off,top,bottom,2,1,BG10,1,top,bottom,2,BG12,(Z031.231/02),Back to first slide,38,1.5.DeviceNet,DeviceNet,Z034.398A/01,current software eprom version:,Z036.247/01-06,has to be used with logic software,eprom version:,Z031.922/07-02 or Z031.922/08-00,X2 to BUS connection,board,X4 Digital/Analog Inputs,top,bottom,2,1,BG10,1,top,bottom,2,BG12,Back to first slide,39,2.5.DeviceNet,bus-,interface,boards,bus interface(X2)to XC,XC to connection board,connection boards,DeviceNet,Z034.398A/01,Z033.203,-,Z038.319,Z035.270/01 one channel,(Com.13014730),Z035.270/02 two channels,(Com.5101572),Z031.939(with gold pins),Z034.353(standard),Back to first slide,40,3.5.DeviceNet,(Z034.398A/01),1 2,ON,V4,=STATE(green),LED is illuminated or off=board not,ready LED is blinking once=board,is running,V3,=CAN STATE(red),LED is illuminated or,blinking=communication fault to the,logic board.,LED is off=communication to logic,board is OK,V2,=DATA EX(green),LED is illuminated=ready for DAT
展开阅读全文