资源描述
测试报告TEST REPORT 申请单位：Applicant收件日期：Date(s) SubmittedDate : Report No. : M-TS- Issue : 1.0样品信息Sample Information订单号P.O.客号Customer型号Model镜框颜色Frame Color镜片颜色Lens Color类别 Type数量Quantity Spectacles Goggles Face-shields 测试说明Test Specification测试环境Test of Condition标准要求Standard Requirement测试时间Test Date ； %R.H.EN 166:2001(E)本次测试项目Test Items7.1.2.1、71.2.2.3、7.1.3、7.1.4.2.2、7.1.5.1、7.1.6、7.1.7、7.2.2、7.2.8、7.3.4。测试结果Test Result 核 检 员： Checked by检 测 员： Tested by 7.1.2.1 Spherical and Astigmatic Refractive PowerSample IDLeft OcularRight OcularResultSpherical Power(D1+D2)/2m-1Astigmatic PowerD1-D2m-1Spherical Power(D1+D2)/2m-1Astigmatic PowerD1-D2m-1123SpecificationCLASS 10.060.060.060.06CLASS 20.120.120.120.12CLASS 3+0.12-0.250.25+0.12-0.250.25Note:D1 and D2 are the refractive powers in the two principal meridians.7.1.2.1 Prismatic PowerSample IDHorizontal Imbalance ()Vertical Imbalance ()ResultBase InBase Out123SpecificationCLASS 10.250.750.25CLASS 20.251.000.25CLASS 30.251.000.257.1.2.2.3 Variations in TransmittanceSample IDLeft (%)Right (%)Relative Variations ( % )Result123Specification17.8%T(L)100%:5%; 0.44%T(L)17.8%:10%;0.023%T(L)0.44%:15%; 0.0012%T(L)0.023%:20%;0.000023%T(L)0.0012%:30%.7.1.2.3 Diffusion of LightSample IDThe Maximum Value of The Reduced Luminance FactorResult123Specification1.00 for welding filters;0.75 for oculars used in eye-protectors against high speed particles; 0.50 for all other oculars7.1.3 Quality of Material and SurfaceRequirementResultSamples are free of bubbles, scratches , inclusions, dull spots, pitting, mould marks, scouring, grains, pocking, scaling and undulation.7.1.4.1 Minimum RobustnessSample IDLoading mass（N）Result123SpecificationThe ocular withstands the application of a 22 mm nominal diameter steel ball with a force of (100 2) N.7.1.4.2.2 Complete Eye-Protectors and Frames Sample IDTemperatureLocationResult1(552)The left eye frontal2The left eye frontal3The right eye frontal4The right eye frontal5The left eye side6The right eye side7(-52)The left eye frontal8The left eye frontal9The right eye frontal10The right eye frontal11The left eye side12The right eye sideSpecificationShall not occur:a) cular fracture;b) ocular deformation;c) ocular housing or frame fracture.7.1.5.1 Stability at an Elevated TemperatureRequirementResultAssembled eye-protectors (8 samples) shall show no apparent deformation.7.1.5.2 Resistance to Ultraviolet Radiation(Oculars Only)Sample IDBefore the testAfter the testPermissible Relative Change%ResultTransmittanve%Transmittanve%The maximum value of the reduced luminance factor123Specification1.00cd/(m2.lx) For welding filters;0.75cd/(m2.lx) For oculars used in eye-protectors against high speed particles;0.50cd/(m2.lx) For all other oculars.17.8% T(L) 100%: 5%0.44% T(L) 17.8%: 10%0.023% T(L) 0.44%: 15%0.0012% T(L) 0.023%: 20%0.000023% T(L) 0.0012%: 30%7.1.6 Resistance to Corrosion RequirementResultAfter having undergone the test for resistance to corrosion, all metal parts of the eye-protector shall display smooth surfaces, free from corrosion.7.1.7 Resistance to IgnitionSample IDComponentResult1Frame2Temple3LensSpecificationNo part of the eye-protector ignites or continues to glow after removal of the steel rod.7.2.2 Protection Against High-Speed ParticlesSample ID LocationVelocity ( ft/sec ) Result 1 The left eye frontal 2 The left eye frontal 3 The left eye frontal 4 The left eye frontal 5 The left eye side 6 The left eye side 7 The left eye coverage 8 The right eye frontal 9 The right eye frontal 10 The right eye frontal 11 The right eye frontal 12 The right eye side 13 The right eye side 14 The right eye coverage SpecificationSpectacles : Low energy impact(A) (147.64152.56)ft/s;Goggles : Low energy impact(A) (147.64152.56)ft/s, medium energy impact(B) (393.70403.54)ft/s;Face-shields : Low energy impact(A) (147.64152.56)ft/s, medium energy impact(B) (393.70403.54)ft/s, high energy impact(C) (623.36639.76)ft/s.Note:1m/s=0.3048 ft/s.7.2.8 Lateral ProtectionRequirementResultSamples are free of bubbles, scratches , inclusions, dull spots, pitting, mould marks, scouring, grains, pocking, scaling and undulation. 7.3.1 Resistance to Surface Damage by Fine ParticlesSample IDThe Maximum Value of The Reduced Luminance FactorResult123Specification5 cd/(m2.lx)7.3.2 Resistance to Fogging of OcularsSample IDMinimum SecondsResult123Specification 8 seconds7.3.3 Oculars with enhanced reflectance in the infraredSample IDSpectral reflectanceResult123Specification 60%7.3.4 Protection Against High-Speed Particles at Extremes of Temperature Sample IDTemperatureLocationVelocity ( ft/s )Result1(552)left eye frontal2left eye frontal3left eye side4right eye frontal5right eye frontal6right eye side7left eye coverage8right eye coverage9(-52)left eye frontal10left eye frontal11left eye side12right eye frontal13right eye frontal14right eye side15left eye coverage16right eye coverageSpecificationSpectacles : Low energy impact(A) (147.64152.56)ft/s;Goggles : Low energy impact(A) (147.64152.56)ft/s, medium energy impact(B) (393.70403.54)ft/s;Face-shields : Low energy impact(A) (147.64152.56)ft/s, medium energy impact(B) (393.70403.54)ft/s, high energy impact(C) (623.36639.76)ft/s.Note:1m/s=0.3048 ft/s.The end.Page 5 of 5
展开阅读全文