最新高中数学必修1知识框图优秀名师资料

高中数学必修1知识框图高中数学(必修1)知识结构图 第一章 集合与函数概念 列举法 a,b,c, 含义与表示 描述法 x|p(x) 图象法 韦恩图; 数轴 包含关系 子集; 真子集 集合 基本关系 相等关系 交集:A?B=x|x?A且x?B 基本运算 并集:A?B=x|x?A或x?B 补集:CAxxUxA,|且U定义域 概念 对应关系 值域 解析法 函数 表示 图象法 列表法 定义 单调性 最值 图象特征 上升或性质 下降 定义 奇偶性 图象特征:对称性 映射 映射的概念 and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline . Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening height h (mm) 1-1.5 1.5-2 weld width b (mm) 5-6 7-6 has slope mouth weld strengthening height h (mm) 1.5-2 2 weld width b (mm) cover had each edge slope mouth about 2 mm argon arc welding weld strengthening surface height and width tube wall thickness (mm) 2-3 3-4 5-6 weld form weld strengthening height h (mm) 1-1 .5 1.5-2 2-2.5 width b (mm) 第二章 基本初等函数(?) n 根式 amnmn分数指数幂 aaamnNn,(0,*,1)指 指 数 数 无理数指数幂 rsrs，与 aaa,指 rsrs()aa, 运算性质 数 rrr()abab,函 数 x定义 yaaa,(0,1)指 数 基 图象: “一撇或一捺”， 过点(0,1).见教材P56 函 本 初 数 性质: 位于x轴上方,以x轴为渐近线 等 函 x数 若则叫以为底的对数aNxaN,定义: 对 (?) log()loglogMNMN,，数 aaa对M运算性质 logloglog,MNaaa数Nn与loglogMnM,aa对数logbc换底公式: log(0,1,0,1,0)baaccb,函alogac数 yxaa,log(0,1)定义: a对 数 图象:位于y轴右侧，以y轴为渐近线.见教材P71 函 数 性质:过点(1，0) 图象见P77图2.3,1 yx,定义: yx,2yx,幂特征:过点(1，1)，3函yx, 具体的五 ,0当时在(0,)，,1数 个幂函数 2yx,0上递增;当时，1,yx,(0,)，,在上递减。 and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline . Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening height h (mm) 1-1.5 1.5-2 weld width b (mm) 5-6 7-6 has slope mouth weld strengthening height h (mm) 1.5-2 2 weld width b (mm) cover had each edge slope mouth about 2 mm argon arc welding weld strengthening surface height and width tube wall thickness (mm) 2-3 3-4 5-6 weld form weld strengthening height h (mm) 1-1 .5 1.5-2 2-2.5 width b (mm) 第三章 函数的应用 方程有实数根fx()0,方程的根与 ,函数的图象与轴有交点yfxx()函数零点的关,函数有零点yfx()函系 数与如果函数在区间上的图yfxab,(),方象是连续不断的一条曲线,并且有程 函数零点的存在性 fafbyfx()()0,(),那么函数在区间内有零点(,)(,),abcab,即存在使得,函 fccfx()0,()0.,这个也就是方程的根数 的 应 用二分法求方程的近似解 用 直线上升 函指数爆炸 数几种不同增长的函数模型 对数增长 模型指数函数，对数函数，用已知函数模型解决问题 及幂函数增长速度的比其较。见教材P98,100 应建立实际问题的函数模型 用 3 and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline . Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening height h (mm) 1-1.5 1.5-2 weld width b (mm) 5-6 7-6 has slope mouth weld strengthening height h (mm) 1.5-2 2 weld width b (mm) cover had each edge slope mouth about 2 mm argon arc welding weld strengthening surface height and width tube wall thickness (mm) 2-3 3-4 5-6 weld form weld strengthening height h (mm) 1-1 .5 1.5-2 2-2.5 width b (mm)数学必修二 弓形：弦及所对的弧组成的图形叫做弓形。第一章 空间几何体的知识结构框架 9切线长定理：过圆外一点所画的圆的两条切线长想等，圆外切四边形对边相等，直角三角形内切圆半径公式.第二章 点、直线、平面之间的位置关系的知识结构框架 and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline . Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening height h (mm) 1-1.5 1.5-2 weld width b (mm) 5-6 7-6 has slope mouth weld strengthening height h (mm) 1.5-2 2 weld width b (mm) cover had each edge slope mouth about 2 mm argon arc welding weld strengthening surface height and width tube wall thickness (mm) 2-3 3-4 5-6 weld form weld strengthening height h (mm) 1-1 .5 1.5-2 2-2.5 width b (mm) 8.直线与圆的位置关系第三章 直线与方程的知识结构框架 第四章 圆与方程的知识结构框架 A、当a0时5 and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline . Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening height h (mm) 1-1.5 1.5-2 weld width b (mm) 5-6 7-6 has slope mouth weld strengthening height h (mm) 1.5-2 2 weld width b (mm) cover had each edge slope mouth about 2 mm argon arc welding weld strengthening surface height and width tube wall thickness (mm) 2-3 3-4 5-6 weld form weld strengthening height h (mm) 1-1 .5 1.5-2 2-2.5 width b (mm)1. 仰角:当从低处观测高处的目标时，视线与水平线所成的锐角称为仰角数学必修三 四、教学重难点：0 抛物线与x轴有2个交点；数学必修四 本章知识结构如下: 3、第五单元“加与减(二)”，第六单元“加与减(三)” 在“加与减”的学习中，结合生活情境，学生将经历从具体情境中抽象出加减法算式的过程，进一步体会加减法的意义;探索并掌握100以内加减法(包括不进位、不退位与进位、退位)和连加、连减、加减混合的计算方法，并能正确计算;能根据具体问题，估计运算的结果;初步学会应用加减法解决生活中简单问题，感受加减法与日常生活的密切联系。本章知识结构如下: and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline . Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening height h (mm) 1-1.5 1.5-2 weld width b (mm) 5-6 7-6 has slope mouth weld strengthening height h (mm) 1.5-2 2 weld width b (mm) cover had each edge slope mouth about 2 mm argon arc welding weld strengthening surface height and width tube wall thickness (mm) 2-3 3-4 5-6 weld form weld strengthening height h (mm) 1-1 .5 1.5-2 2-2.5 width b (mm) 1、开展一帮一活动，让优秀学生带动后进生，促使他们的转化。本章知识结构如下: 当a越大，抛物线开口越小；当a越小，抛物线的开口越大。7 and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline . Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening height h (mm) 1-1.5 1.5-2 weld width b (mm) 5-6 7-6 has slope mouth weld strengthening height h (mm) 1.5-2 2 weld width b (mm) cover had each edge slope mouth about 2 mm argon arc welding weld strengthening surface height and width tube wall thickness (mm) 2-3 3-4 5-6 weld form weld strengthening height h (mm) 1-1 .5 1.5-2 2-2.5 width b (mm)