资源描述
1窗体顶端A medium-sized business is researching available options for connecting to the Internet. The company is looking for a high speed option with dedicated, symmetric access. Which connection type should the company choose?DSLdialupsatelliteleased linecable modem窗体底端2窗体顶端What is the purpose of having a converged network?to provide high speed connectivity to all end devicesto make sure that all types of data packets will be treated equallyto achieve fault tolerance and high availability of data network infrastructure devicesto reduce the cost of deploying and maintaining the communication infrastructure窗体底端3窗体顶端What characteristic of a network enables it to quickly grow to support new users and applications without impacting the performance of the service being delivered to existing users?reliabilityscalabilityquality of serviceaccessibility窗体底端4窗体顶端Which connection provides a secure CLI session with encryption to a Cisco switch?a console connectionan AUX connectiona Telnet connectionan SSH connection窗体底端5窗体顶端A network technician is attempting to configure an interface by entering the following command: SanJose(config)#ip address 192.168.2.1 255.255.255.0. The command is rejected by the device. What is the reason for this?The command is being entered from the wrong mode of operation.The command syntax is wrong.The subnet mask information is incorrect.The interface is shutdown and must be enabled before the switch will accept the IP address.窗体底端6窗体顶端After several configuration changes are made to a router, thecopy running-configuration startup-configurationcommand is issued. Where will the changes be stored?flashROMNVRAMRAMthe configuration registera TFTP server窗体底端7窗体顶端Refer to the exhibit. From global configuration mode, an administrator is attempting to create a message-of-the-day banner by using the commandbanner motd V Authorized access only! Violators will be prosecuted! VWhen users log in using Telnet, the banner does not appear correctly. What is the problem?The banner message is too long.The delimiting character appears in the banner message.The symbol “!” signals the end of a banner message.Message-of-the-day banners will only appear when a user logs in through the console port.窗体底端8窗体顶端What are three characteristics of an SVI? (Choose three.)It is designed as a security protocol to protect switch ports.It is not associated with any physical interface on a switch.It is a special interface that allows connectivity by different types of media.It is required to allow connectivity by any device at any location.It provides a means to remotely manage a switch.It is associated with VLAN1 by default.窗体底端9窗体顶端A technician configures a switch with these commands:SwitchA(config)#interface vlan 1SwitchA(config-if)#ip address 192.168.1.1 255.255.255.0SwitchA(config-if)#no shutdownWhat is the technician configuring?Telnet accessSVIpassword encryptionphysical switchport access窗体底端10窗体顶端In computer communication, what is the purpose of message encoding?to convert information to the appropriate form for transmissionto interpret informationto break large messages into smaller framesto negotiate correct timing for successful communication窗体底端11窗体顶端What protocol is responsible for controlling the size of segments and the rate at which segments are exchanged between a web client and a web server?TCPIPHTTPEthernet窗体底端12窗体顶端What are two benefits of using a layered network model? (Choose two.)It assists in protocol design.It speeds up packet delivery.It prevents designers from creating their own model.It prevents technology in one layer from affecting other layers.It ensures a device at one layer can function at the next higher layer.窗体底端13窗体顶端What is the process of dividing a data stream into smaller pieces before transmission?segmentationencapsulationencodingflow control窗体底端14窗体顶端When IPv4 addressing is manually configured on a web server, which property of the IPv4 configuration identifies the network and host portion for an IPv4 address?DNS server addresssubnet maskdefault gatewayDHCP server address窗体底端15窗体顶端A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized?presentation layernetwork layerphysical layerdata link layer窗体底端16窗体顶端A network engineer is measuring the transfer of bits across the company backbone for a mission critical database application. The engineer notices that the network throughput appears lower than the bandwidth expected. Which three factors could influence the differences in throughput? (Choose three.)the amount of traffic that is currently crossing the networkthe sophistication of the encapsulation method applied to the datathe type of traffic that is crossing the networkthe latency that is created by the number of network devices that the data is crossingthe bandwidth of the WAN connection to the Internetthe reliability of the gigabit Ethernet infrastructure of the backbone窗体底端17窗体顶端Which type of UTP cable is used to connect a PC to a switch port?consolerollovercrossoverstraight-through窗体底端18窗体顶端What is a characteristic of the LLC sublayer?It provides the logical addressing required that identifies the device.It provides delimitation of data according to the physical signaling requirements of the medium.It places information in the frame allowing multiple Layer 3 protocols to use the same network interface and media.It defines software processes that provide services to the physical layer.窗体底端19窗体顶端What are the three primary functions provided by Layer 2 data encapsulation? (Choose three.)error correction through a collision detection methodsession control using port numbersdata link layer addressingplacement and removal of frames from the mediadetection of errors through CRC calculationsdelimiting groups of bits into framesconversion of bits into data signals窗体底端20窗体顶端What will a host on an Ethernet network do if it receives a frame with a destination MAC address that does not match its own MAC address?It will discard the frame.It will forward the frame to the next host.It will remove the frame from the media.It will strip off the data-link frame to check the destination IP address.窗体底端21窗体顶端What are two actions performed by a Cisco switch? (Choose two.)building a routing table that is based on the first IP address in the frame headerusing the source MAC addresses of frames to build and maintain a MAC address tableforwarding frames with unknown destination IP addresses to the default gatewayutilizing the MAC address table to forward frames via the destination MAC addressexamining the destination MAC address to add new entries to the MAC address table窗体底端22窗体顶端What are two examples of the cut-through switching method? (Choose two.)store-and-forward switchingfast-forward switchingCRC switchingfragment-free switchingQOS switching窗体底端23窗体顶端Refer to the exhibit. If host A sends an IP packet to host B, what will the destination address be in the frame when it leaves host A?DD:DD:DD:DD:DD:DD172.168.10.99CC:CC:CC:CC:CC:CC172.168.10.65BB:BB:BB:BB:BB:BBAA:AA:AA:AA:AA:AA窗体底端24窗体顶端What are two services provided by the OSI network layer? (Choose two.)performing error detectionrouting packets toward the destinationencapsulating PDUs from the transport layerplacement of frames on the mediacollision detection窗体底端25窗体顶端What information is added during encapsulation at OSI Layer 3?source and destination MACsource and destination application protocolsource and destination port numbersource and destination IP address窗体底端26窗体顶端What are two functions of NVRAM? (Choose two.)to store the routing tableto retain contents when power is removedto store the startup configuration fileto contain the running configuration fileto store the ARP table窗体底端27窗体顶端Refer to the exhibit. The network administrator for a small advertising company has chosen to use the 192.168.5.96/27 network for internal LAN addressing. As shown in the exhibit, a static IP address is assigned to the company web server. However, the web server cannot access the Internet. The administrator verifies that local workstations with IP addresses that are assigned by a DHCP server can access the Internet, and the web server is able to ping local workstations. Which component is incorrectly configured?subnet maskDNS addresshost IP addressdefault gateway address窗体底端28窗体顶端Why does a Layer 3 device perform the ANDing process on a destination IP address and subnet mask?to identify the broadcast address of the destination networkto identify the host address of the destination hostto identify faulty framesto identify the network address of the destination network窗体底端29窗体顶端What are the three ranges of IP addresses that are reserved for internal private use? (Choose three.)10.0.0.0/864.100.0.0/14127.16.0.0/12172.16.0.0/12192.31.7.0/24192.168.0.0/16窗体底端30窗体顶端Which three addresses are valid public addresses? (Choose three.)198.133.219.17192.168.1.24510.15.250.5128.107.12.117192.15.301.24064.104.78.227窗体底端31窗体顶端What type of IPv6 address is FE80:1?loopbacklink-localmulticastglobal unicast窗体底端32窗体顶端Refer to the exhibit. On the basis of the output, which two statements about network connectivity are correct? (Choose two.)There is connectivity between this device and the device at 192.168.100.1.The connectivity between these two hosts allows for videoconferencing calls.There are 4 hops between this device and the device at 192.168.100.1.The average transmission time between the two hosts is 2 milliseconds.This host does not have a default gateway configured.窗体底端33窗体顶端Which subnet would include the address 192.168.1.96 as a usable host address?192.168.1.64/26192.168.1.32/27192.168.1.32/28192.168.1.64/29窗体底端34窗体顶端How many hosts are addressable on a network that has a mask of 255.255.255.248?2681416254窗体底端35窗体顶端Which statement is true about variable-length subnet masking?Each subnet is the same size.The size of each subnet may be different, depending on requirements.Subnets may only be subnetted one additional time.Bits are returned, rather than borrowed, to create additional subnets.窗体底端36窗体顶端Refer to the exhibit. Consider the IP address of 192.168.10.0/24 that has been assigned to a high school building. The largest network in this building has 100 devices. If 192.168.10.0 is the network number for the largest network, what would be the network number for the next largest network, which has 40 devices?192.168.10.0192.168.10.128192.168.10.192192.168.10.224192.168.10.240窗体底端37窗体顶端In what two situations would UDP be the preferred transport protocol over TCP? (Choose two.)when applications need to guarantee that a packet arrives intact, in sequence, and unduplicatedwhen a faster delivery mechanism is neededwhen delivery overhead is not an issuewhen applications do not need to guarantee delivery of the datawhen destination port numbers are dynamic窗体底端38窗体顶端What important information is added to the TCP/IP transport layer header to ensure communication and connectivity with a remote network device?timing and synchronizationdestination and source port numbersdestination and source physical addressesdestination and source logical network addresses窗体底端39窗体顶端What is the TCP mechanism used in congestion avoidance?three-way handshakesocket pairtwo-way handshakesliding window窗体底端40窗体顶端Which three statements characterize UDP? (Choose three.)UDP provides basic connectionless transport layer functions.UDP provides connection-oriented, fast transport of data at Layer 3.UDP relies on application layer protocols for error detection.UDP is a low overhead protocol that does not provide sequencing or flow control mechanisms.UDP relies on IP for error detection and recovery.UDP provides sophisticated flow control mechanisms.窗体底端41窗体顶端Which two tasks are functions of the presentation layer? (Choose two.)compressionaddressingencryptionsession controlauthentication窗体底端42窗体顶端Which two protocols operate at the highest layer of the TCP/IP protocol stack? (Choose two.)DNSEthernetIPPOPTCPUDP窗体底端43窗体顶端Which two roles can a computer assume in a peer-to-peer network where a file is being shared between two computers? (Choose two.)clientmasterserverslavetransient窗体底端44窗体顶端What is the function of the HTTP GET message?to request an HTML page from a web serverto send error information from a web server to a web clientto upload content to a web server from a web clientto retrieve client email from an email server using TCP port 110窗体底端45窗体顶端A wireless host needs to request an IP address. What protocol would be used to process the request?FTPHTTPDHCPICMPSNMP窗体底端46窗体顶端When planning for network growth, where in the network should packet captures take place to assess network traffic?on as many different network segments as possibleonly at the edge of the networkbetween hosts and the default gatewayonly on the busiest network segment窗体底端47窗体顶端When applied to a router, which command would help mitigate brute-force password attacks against the router?exec-timeout 30service password-encryptionbanner motd $Max failed logins = 5$login block-for 60 attempts 5 within 60窗体底端48窗体顶端Refer to the exhibit. An administrator is testing connectivity to a remote device with the IP address 10.1.1.1. What does the output of this command indicate?Connectivity to the remote device was successful.A router along the path did not have a route to the destination.A ping packet is being blocked by a security device along the path.The connection timed out while waiting for a reply from the remote device.窗体底端
展开阅读全文