自卸汽车连杆倾斜机构设计【优秀课程毕业设计含6张CAD图纸+带开题报告+文献综述+外文翻译】-clsj11
自卸汽车连杆倾斜机构设计
摘要
本文通过对市场上出现的各种中型自卸汽车的车厢和举升机构进行了较详细底了解,确认了某型自卸汽车的车厢和举升机构的设计方案,较好底解决了自卸车设计和制造成本较高的问题,给生产、改装自卸汽车的生产企业提供了一种新思路。本文首先对自卸车的设计特点以及国内外发展现状做了相关的概述。接着,从举升机构的设计、液压系统的设计等方面进行了某型自卸车的总体设计。其中,举升机构设计中对举升机构进行了运动分析和受力分析,然后在液压系统设计中,对其工作原理进行了说明并通过计算得出合理的液压装置。最后对自卸车副车架进行了设计。
关键字:自卸汽车 副车架 举升机构 液压系统
Abstract
This article through to appear on the market a variety of medium-sized cars and lifting mechanism of dump truck to understand in detail, and confirm the carriage of a dump truck, and the design of lifting mechanism, better solved the problem of the dump truck design and manufacture of high cost, for the production, the modification of the dump truck production enterprises to provide a new way of thinking. This paper gives an overview of the design characteristics of self-unloading vehicle and the development status of the car. Then, the design of the lifting mechanism and the design of hydraulic system were carried out in the design of the dongfeng 140 dump truck. Among them, in the design of lifting mechanism of lifting mechanism motion analysis and force analysis, and then in the design of hydraulic system, its working principle is described and calculated the reasonable hydraulic equipment. Finally, the car chassis was designed.
Keyword: Dump truck Sub-frame Lifting mechanism Hydraulic system.
目录
摘要 I
Abstract II
目录 1
第1章 绪 论 1
1.1课题来源及研究意义 1
第2章 整车参数的确定及校核 2
2.1整车尺寸参数的确定 2
第3章 液压举升机构的设计 4
3.1液压举升机构时应满足的性能 4
3.2举升系统性能主要评价参数 4
3.3液压举升机构方案的确定 5
3.3.1液压举升机构简述 5
3.3.2液压举升机构方案的选择 7
3.4举升机构几何尺寸的确定 8
3.4.1举升机构安装位置的设计 8
3.4.2三角臂的设计 9
3.4.3拉杆长度的设计计算 9
3.5力学计算与校核 10
3.5.1机构的坐标计算 10
3.5.2机构受力分析 11
3.5.3拉杆截面尺寸的确定 13
第4章 液压系统的计算 14
4.1液压油缸性能参数计算 14
4.2液压泵性能参数计算 15
4.3系统压力校核 16
4.4车厢举升时间的校核 16
第5章 副车架与车厢及其附件的设计 17
5.1选用的底盘主车架的主要尺寸 17
5.2副车架的结构设计 17
5.2.1副车架的外形 17
5.2.2副车架的选材 18
5.4副车架的强度刚度弯曲适应性校核 18
总 结 24
致 谢 25
参考文献 26
【详情如下】【需要咨询购买全套设计请加QQ1459919609】
A0-自卸汽车连杆倾斜机构装配图.dwg
A0-车厢.dwg
A1-举升机构.dwg
A1-副车架.dwg
A1-液压缸座.dwg
A2-液压系统.dwg
CAXA备份
外文翻译.doc
文件清单.txt
自卸汽车连杆倾斜机构设计开题报告.doc
自卸汽车连杆倾斜机构设计文献综述.doc
自卸汽车连杆倾斜机构设计说明书.docx