使用超级终端抓MG3000-R32的sip协议trace方法

使用超级终端抓MG3000-R32的sip消息trace设置方法使用超级终端工具，telnet MG3000-R32的IP地址 端口100，出现如下图，然后选中（工具），里面有捕获文字，点确定后选一个文件存放位置= = VOIP GATEWAY = = V 1.5.1 = = All Rights Reserved = =Login: userPassword: （密码不显示，实际为user）- Welcome to Use VOIP GATEWAY -VOIP GATEWAY:c tThe command has been completed successfully!VOIP GATEWAY:managetracertThe command has been completed successfully!VOIP GATEWAY:managetracestPlease input module ID 0-all module 1-ether 2-DSP 3-slic 4-trap 5-console 6-telnet console 7-web console 10-SNMP 11-manage 12-SIP protocol 13-SIP application : 11Please input port ID(0-32): 0Please input trace type 1-entry 2-return 3-thread 4-pipe 5-SEM 6-MSG 7-timer 8-memory 9-normal 10-ACK 11-all : 11Please input trace level(1-5): 4Please input trace output mode(1-console 2-buffer): 1Please input console input mode(1-real time 2-task): 1The command has been completed successfully!VOIP GATEWAY:managetracestPlease input module ID 0-all module 1-ether 2-DSP 3-slic 4-trap 5-console 6-telnet console 7-web console 10-SNMP 11-manage 12-SIP protocol 13-SIP application : 13978646130:170000 MANAGE: DspVer is : v6_14978646130:170000 MANAGE: KernelVer is : v1.2.0Please input port ID(0-32): 0Please input trace type 1-entry 2-return 3-thread 4-pipe 5-SEM 6-MSG 7-timer 8-memory 9-normal 10-ACK 11-all : 11Please input trace level(1-5): 4Please input trace output mode(1-console 2-buffer): 1Please input console input mode(1-real time 2-task): 1The command has been completed successfully!VOIP GATEWAY:managetrace此时trace已经设置好了，拨打电话，会出现很多消息，复现问题后，输入如下命令关闭traceVOIP GATEWAY:managetracertThe command has been completed successfully!然后到刚才存放的位置，把文档发邮件提供给工程服务人员。