资源描述
滚轮注塑成型工艺及模具设计大学论文 - 2023 届 本科毕业设计论文 题 目 名 称: 学 院部: 专 业: 学 生 姓 名: 班 级: 指导老师姓名: 最终评定成绩: 滚轮注塑成型工艺及模具设计 学号 职称 职称 XX大学教务处 I 摘 要 本设计是滚轮塑料零件的注塑模具设计,在结合了传统的机械设计后把CAD/CAM技术应用在注塑模具的设计上,在CAD系统实行了模型和注塑模具的设计。本文介绍了我国当前模具技术的开展状况以及CAD/CAM在模具上的应用,其中包括AUTOCAD。主要的机械局部设计,其内容包括塑料注塑模具的工作原理及应用,设计准那么。塑料注塑模的设计计算,包括模具构造设计,注塑机的选用,浇注系统的设计,动、定模,浇注系统,脱模机构,顶出机构,冷却系统等设计等方面。如此设计出的构造可确保模具工作运行可靠。 全套设计加 197216396或401339828 【关键词】:p :CAD;CAM;注塑模;工艺 II 大学本科毕业设计论文 ABSTRACT It is to design the holder injection mould, references to the traditional mechanical design, focus on the CAD/CAM application in the plastic mould design, that is to say to apply the CAD system in model and plastic injection mould design. This artic introduces the mould technology and the CAD/CAM application of mould in china nowadays. Including AUTOCAD,MASTERCAM. While main mechanical designs content the principle and application of the plastic mould, design standards. The calculation of the plastic mould design concerns about the mould construction design, choosing Injection Molding Machine, injection system ,the move mould, immobility mould, the irrigating system, the doffing mould organ, the goring organ, the cooling systems design and so on. The structure designed in such way can ensure the reliable running of the mould. Keywords: CAD;CAM;PLASTIC INJECTION;MOULD III 大学本科毕业设计论文 目 录 摘 要 . II ABSTRACT . III 目 录 . IV 第1章 绪 论 . 1 1.1模具的作用与地位 . 1 1.2 本次设计研究目的及意义 . 1 1.3 CAD开展概况 . 1 1.4 注塑模CAD内容 . 2 第2章 塑件的工艺分析p . 4 2.1塑件的工艺性分析p . 4 2.1.1塑件的原材料分析p . 4 2.1.2 聚甲醛的注塑工艺参数 . 4 2.2塑件的构造和尺寸精度及外表质量分析p . 6 2.2.1构造分析p . 6 2.2.2尺寸精度分析p . 6 2.2.3外表质量分析p . 6 2.3计算塑件的体积和质量 . 6 第3章 注射机的选择及校核 . 7 3.1 注射机的选择 . 7 3.2 型腔数目确实定及校核 . 8 3.3 锁模力的校核 . 9 3.4 开模行程的校核 . 9 第4章 浇注系统的设计 . 10 4.1 分型面的选择 . 10 4.2 主流道的设计 .11 4.3 浇口设计 .11 4.3.1 剪切速率的校核 . 12 4.3.2 主流道剪切速率校核 . 12 IV 大学本科毕业设计论文 4.3.3 浇口剪切速率的校核 . 12 第5章 成型零部件设计 . 14 5.1 型腔和型芯工作尺寸计算 . 14 5.2 型腔侧壁厚度计算 . 15 第6章 合模导向机构设计 . 16 第7章 温度调节系统设计 . 17 7.1 对温度调节系统的要求 . 17 7.2 冷却系统设计 . 17 7.2.1 设计原那么 . 17 7.2.2 冷却时间确实定 . 17 7.2.3 塑料熔体释放的热量 . 18 7.2.4 高温喷嘴向模具的接触传热 . 18 7.2.5 注射模通过自然冷却传导走的热量 . 19 7.2.6 冷却系统的计算 . 20 7.2.7 凹模冷却系统的计算 . 20 第8章 模具工作原理说明 . 22 总 结 . 23 【参考文献】:p . 24 致 谢 . 25 V 第 9 页 共 9 页
展开阅读全文