资源描述
世界级的专业热交换器厂商 The World-class Professional Heat Exchanger Units Manufacturer 提纲 standard Plate传统板片 Semi-Welded Heat Exchangers半焊式换热器 Brazed Plate Heat Exchangers钎焊式换热器 Ethanol 酒精工业 Pulp & Paper 造纸 Sugar 制糖 Food & Beverage 食品与饮料 HVAC 暖通空 调 Chemical 化学 Marine 船舶 Power 能源 Industrial 工业 Oil & Gas 石油天然气 Refrigeration 冷却工艺 Petrochemical 石化 SmartHeat Applications应用领域 SmartHeat standard Plate标准板片 SmartHeat Standard Plate SmartHeat标准板片 适合各种工况的板式换热器 每种板片都有 45种不同的尺寸 通常是单流道（根据独特的板片设计） 接口的尺寸从 25mm到 500mm都有 压力设计高达 25巴 板片的材质： AISI304， AISI316和 Titan 垫片的材质：腈， EPDM和氟橡胶 框架设计：工业和卫生领域 The Inlet Area入口导流区 Low pressure drop低压力降 No dead spots无死点 Even distribution导流均匀 Turbulence in the inlet area导流区产主 紊流 The Main Pattern主换热区 Optimal use of pressure drop最佳利用 压力降 High turbulence高紊流 High K-value高 K值 The Optimal Solution最佳解决方案 The right connection size for task适用 各种工况的板片尺寸 The right plate length for the task 不同热长度的板片 Single pass solution all connection on the head of the Heat Exchanger 所有工况都能提供单流程的板片 High K-value高 K值 SmartHeat Standard Plate SmartHeat标准板片 The Gasket groove 垫片 槽 Closed gasket groove能有效地锁住垫片 Full support of the gasket 能为垫片提供完整 的支撑 Low support of the gasket 垫片压缩量小 Long lifetime of the gasket 使垫片使用寿命 更长 The Gasket锁垫片 Closed gasket groove 能将垫片牢固地锁在垫 片槽内 Full support of the gasket 可以给垫片提供完 整的支撑 Long lifetime of the gasket 垫片寿命长 Easy gasket fitting 垫片的安装非常方便 Locks plate in the next plate 垫片还能为下 一个板片定位 The Gasket垫片 Semi-Welded Heat Exchangers半焊式换热器 The Inlet Area入口导流区 Low pressure drop低压力降 No dead spots无死点 Even distribution导流均匀 Turbulence in the Inlet Area导流区也能产生紊流 The Main Pattern主换热区 Optimal use of pressure drop最佳利用压力降 High turbulence高紊流 High K-value高 K值 The Gasket groove垫片槽 Closed gasket groove能有效地锁住垫片 Full support of the gasket能为垫片提供完成的支撑 O ring gasket O型圈 The higher working pressure工作压力高 The smaller the risk for leaks泄露风险小 Long lifetime af the gasket垫片寿命长 Locks the plate in the next plate垫片还能为下一个板片定位 Laser Welded Plates激光焊接板片 Suitable for NH13 适用于 NH13 Evaporators and Condensers蒸发器和冷凝器 High working pressure工作压力高 Chemical Industry化工 Miner gasket area垫片量少 Safe operation without leaking安全运行无泄露 Small liquid volume流体容积小 Semi-Welded Heat Exchangers 半焊式换热器 The Ring Gasket O型圈 Separate gasket material隔离介质 Closed gasket groove锁在垫片槽内 Full support of the gasket能为垫片提供完整 的支撑 Long lifetime of the gasket垫片寿命长 Semi-Welded Heat Exchangers半焊式换热器 Free-Flow Heat Exchangers自由流换热器 Brazed Plate Heat Exchangers钎焊式换热器 Construction 结构 SmartHeat brazed plate exchanger consists of a number of thin, acid-resistant stainlessted plates with copper to be precicion stamped and assembled as a unit, each alternate plate being rotated 180 . The plate pack, assembled with two end plates and connections, is vacuum brazed at high temperatures providing a permanently sealed heat exchanger. The final result is a strong and compact plate heat exhanger with extremely high heat transmissions. SmartHeat 钎焊式板式换热器是由一些很 薄的防酸的不锈钢及焊料制成的，这样可以更紧密地粘合和 组装，交替的两个板片旋转 180度。由两个端板和接口将板片 组装好就构成了整个换热器，换热器是在很高的温度下钎焊 的，这样可以使换热器永久密封。最终生产出的是一台牢固 密闭的具有很高热传导能力的钎焊式板式换热器。 Advantages of the Brazed Plate Heat Exchanger 钎焊 式换热器的优点 Low purchase price, high technical efficiency combined with thin plate material and low production costs keep the SmartHeat sales price of the brazed heat exchanger at an extremely competitive level.低 采购价格、高科技效能、很薄的板片材料、以及 低制造成本，这些都使得 SmartHeat钎焊式换热器 的销售价格处于一个非常有竞争力的水平 。 High temperature and pressure, contrary to the traditional plate heat exchanger. The brazed Plate Heat Exchanger does not contain rubber gaskets and thus operate continuosly at the tempertures from minus 180 C up to 200 C. The operating pressure can be as high as 30 bar.与传统板式换热器相比，钎 焊式换热器能耐更高的温度和压力。钎焊式换热 器没有橡胶垫片，但仍能在 - 180 C 到 200 C之 间正常运行。运行压力可高达 30巴。 Brazed Plate Heat Exchangers钎焊式换热器 Typical applications are: 典型应用 District heating and heating and ventilation散热器，加热器，通风设备 Solar heating and air-conditioning units太阳能加热配套产品，空调设备 Heating pumps and heat recovering units热泵及热回收系统 Hydraulic and fuel oil units水压及燃油设备
展开阅读全文